Announcement
Collapse
No announcement yet.
RPM at 65 MPH
Collapse
X
-
old_chopper
RPM at 65 MPH
My GS550 doesn't have a speedo or tach. I was riding with my bunch this weekend and we were heading across town on one of the expressways. I didn't have any trouble keeping up but it sounded like the motor was revved pretty good. I matched the stock drive ratio when I put the bike together. What RPM would a stock GS550 be turning in 6th at 65 MPH?Tags: None
-
waterman
I am guessing around 5000 rpm, maybe a little higher. If mine wasn't sitting on a battery charger, I would go out and give it a go for you. Not sure what tire you are running or if it even matters, may change it a little.
If you are concerned about rpms, don't worry, the 550 was made to rev. I like to keep mine at 6000 or better if possible, here is where it is just starting to make good power. These aren't slow spinning V twins, revs won't kill them. Wind it up and enjoy.
-
Forum LongTimerGSResource Superstar
Past Site Supporter
Super Site Supporter- Mar 2006
- 35605
- Torrance, CA
6000 rpm would be my guess, depending on the gearing used.Ed
To measure is to know.
Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182
Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846
Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf
KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection
Comment
-
waterman
I got mine fired up today and at 65mph indicated, showed 5700 rpms, as usual Ed was right. Your gearing, tires, chain, may vary.
Comment
-
Demonthrall
-
mattocs
-
Forum LongTimerGSResource Superstar
Past Site Supporter
Super Site Supporter- Mar 2006
- 35605
- Torrance, CA
Originally posted by mattocs View PostMy 1982 GS450L does 4100rpm at 65mhp in 6th gear. It hits 4500rpm at about 72mph.Ed
To measure is to know.
Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182
Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846
Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf
KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection
Comment
-
mattocs
Not sure if the PO changed the gearing or what. But it does read that on the tach.
I've only had the bike for 6 months / 1300 miles.
Comment
Comment