Announcement

Collapse
No announcement yet.

gs1000e will not rev past 7000 rpm

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    #16
    after i cleaned my cv carbys.....

    after i cleaned my cv carbys on my 1980 gs1000e should i ,,,,,or would it have been a benifit dropping the clip on the needle from 3rd to 4th from top with pilot jets 40 and mains 108...as std..,,i,m still trying to get some small st/st washers to go on the carby needle to replace the nylon white washer ,,, but radio shack will not send overseas.. i,ll try my hardware farmers supply next week regards david

    Comment

    Working...
    X