Announcement

Collapse
No announcement yet.

just a product question.

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    just a product question.

    i have been looking into some different products. Z-Max= claims that it can clean everything in your engine and improve hp and fuel economy. has anyone ever used this stuff? if so what was the results? also i have been looking into lucas products. i have the same questions. have you used it and what was the reusults? also can these products be used w/ synthetics? thanks for asnwering.

    #2
    Here we go again.
    http://img.photobucket.com/albums/v5...tatesMap-1.jpg

    Life is too short to ride an L.

    Comment


      #3
      Originally posted by smokienutz View Post
      i have been looking into some different products. Z-Max= claims that it can clean everything in your engine and improve hp and fuel economy. has anyone ever used this stuff? if so what was the results? also i have been looking into lucas products. i have the same questions. have you used it and what was the reusults? also can these products be used w/ synthetics? thanks for asnwering.
      Oh Tom, dont be such a coot The poor boy is simply asking an honest question!

      Seriously though brother, these questions have been asked a Gazillion Bazillion Kajillion times on here. Not busting your balls, im just suggesting that using the "SEARCH" button up there on the top of the board can usually answer your questions about fuel and oil additives, which brand of tires are better, what oil is best, yadda yadda yadda.. again, not trying to be a jerk at all.

      But, to answer your question:
      These bikes were mostly built when UNLEADED was a new fangled gasoline.. 87 Octain was considered JET FUEL, and snake oils like you're speaking of hadnt even been thought of. The motors were never designed to take such things. Simple oil and gasoline was all that was required. In fact, there are parts in your motor that will absolutely REVOLT if you put certain additives or other such oddities in them. The clutch will IMMEDIATELY start slipping if you put modern, eco friendly car oils in them (Synthetics are fine, but seriously, its a waste of money, Shell Rotella 15W40 works absolutely FANTASTIC, and the bikes LOVE IT, and if you really want synthetic, stick to Royal Purple, or Rotella 5w synthetic, its fairly cheap) The ONLY additive that pretty much ANYONE here would EVER suggest putting in your crank case (oil) is SEAFOAM, and even then, there are those who suggest that it may not be a good idea depending on what model you own, etc. Seafoam in your tank ( a capfull every couple tanks) will help keep varnishing in the carbs down, and might help keep carbon buildup on the valves down. But PLEASE PLEASE PLEASE dont put any other hoodoo hocuss pocuss, instant horsepressure miracle sauce in your bike... PLEASE..

      Hope this helps

      Comment


        #4
        Originally posted by TheCafeKid View Post
        Oh Tom, dont be such a coot The poor boy is simply asking an honest question!

        Seriously though brother, these questions have been asked a Gazillion Bazillion Kajillion times on here. Not busting your balls, im just suggesting that using the "SEARCH" button up there on the top of the board can usually answer your questions about fuel and oil additives, which brand of tires are better, what oil is best, yadda yadda yadda.. again, not trying to be a jerk at all.

        But, to answer your question:
        These bikes were mostly built when UNLEADED was a new fangled gasoline.. 87 Octain was considered JET FUEL, and snake oils like you're speaking of hadnt even been thought of. The motors were never designed to take such things. Simple oil and gasoline was all that was required. In fact, there are parts in your motor that will absolutely REVOLT if you put certain additives or other such oddities in them. The clutch will IMMEDIATELY start slipping if you put modern, eco friendly car oils in them (Synthetics are fine, but seriously, its a waste of money, Shell Rotella 15W40 works absolutely FANTASTIC, and the bikes LOVE IT, and if you really want synthetic, stick to Royal Purple, or Rotella 5w synthetic, its fairly cheap) The ONLY additive that pretty much ANYONE here would EVER suggest putting in your crank case (oil) is SEAFOAM, and even then, there are those who suggest that it may not be a good idea depending on what model you own, etc. Seafoam in your tank ( a capfull every couple tanks) will help keep varnishing in the carbs down, and might help keep carbon buildup on the valves down. But PLEASE PLEASE PLEASE dont put any other hoodoo hocuss pocuss, instant horsepressure miracle sauce in your bike... PLEASE..

        Hope this helps
        lol it is just an honest question. i here some swear by this stuff (lucas) others say it's a waste of money. and i must be doing the search engine wrong becuz for some reason my keywords don't come up. not doubting the site's engine at all. i am just saying i am not the search/keyword expert. my bad. but ty for answering. i will stick to my seafoam and the usual fluids and move on .

        Comment


          #5
          If at any point you doubt your search results you can use google to search the site.... ' "your search here" ' site:www.thegsresources.com '

          Comment


            #6
            Originally posted by smokienutz View Post
            lol it is just an honest question. i here some swear by this stuff (lucas) others say it's a waste of money. and i must be doing the search engine wrong becuz for some reason my keywords don't come up. not doubting the site's engine at all. i am just saying i am not the search/keyword expert. my bad. but ty for answering. i will stick to my seafoam and the usual fluids and move on .
            Searching using "titles only" helps narrow down the hits, but obviously you need to find a key word to search for. Seafoam is the most popular additive so if you search for that there will be lots of hits.

            Regarding using this kind of stuff in general, as Josh said, it's pretty much a waste other than other than maybe a little in the gas tank on occasion. Definitely not something you need do to on a regular basis.
            Ed

            To measure is to know.

            Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182

            Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846

            Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf

            KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection

            Comment

            Working...
            X