My question is - does anyone know what motor uses a 34 tooth sprocket?
Announcement
Collapse
No announcement yet.
Cam sprocket question
Collapse
X
-
Anonymous
Cam sprocket question
I purchased some cams and sprockets off ebay. The trouble is that the sprockets on my 1100 are 30 tooth units and the one I purchased is 34 tooth. This is not good.
My question is - does anyone know what motor uses a 34 tooth sprocket?Tags: None
-
Billy Ricks
Steve,
About 11 or 12 years ago I had ordered a set from V&H that were listed for the 16 vavle 1100/1150 motors. I figured since they used the same cams for the 700/750s and the 1100/1150 motors the gears would be the same. Wrong, if I remember right my 700 gears were smaller than the 1100/1150. That's probably the gears you have.
-
Anonymous
Hi there!
I?m not sure about the numbers of teeths but I do know that the GSX-R engines uses larger sprockets than ours.
Do you know what cams you bought?
Comment
-
Anonymous
The cams are supposed to be Yoshi stage 1. I'm not so sure about that right now either. I need to find some specs for that cam and then check it out.
They may be gsxr sprockets if they are larger. I'll try to find out how many teeth on those. Tjanks for the replys. I was tired last night and just went to bed without doing anything about this situation.
Comment
-
Anonymous
If anyone has a GS1100 2 valve motor and ever has the valve cover off - please let me know if it has a 34 tooth cam sprocket. If it does I would be willing to sell adjustable sprockets for it cheap.
Comment
Comment