Announcement

Collapse
No announcement yet.

carb question

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    carb question

    Recently bought a set of carbs from salvage yard for a 1982 Suzuki GS650L but now find it is for a 1981. #1 and 2 intakes match up, but #3 and 4 are about 1/2" off. Is it do-able or do I need to start over and find a correct set?

    #2
    Re: carb question

    Since the carbs on both models are equally spaced, either the boots would all line up, or none would line up. I suspect that your model has boots with a slight angle cast into them and they will line up if you rotate the rubber boots/induction tubes.

    Earl



    Originally posted by tlube
    Recently bought a set of carbs from salvage yard for a 1982 Suzuki GS650L but now find it is for a 1981. #1 and 2 intakes match up, but #3 and 4 are about 1/2" off. Is it do-able or do I need to start over and find a correct set?
    Komorebi-The light filtering through the trees.

    I would rather sit on a pumpkin and have it all to myself than be crowded on a velvet cushion. H.D.T.

    Comment


      #3
      screws are rusted on the boots, but we'll give it a try! thank you

      Comment


        #4
        worked! thanks!!

        Comment

        Working...
        X