Announcement

Collapse
No announcement yet.

Degree wheel

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Degree wheel

    can you guys take a look at this and tell me what you think. i would like suggestions for imporvement before i release this to the gs world. i don't know if those valve open / close degrees are right on the wheel i used what i found i think it is for a 350 v8.

    www.grimp.net\ryan\degree_wheel.pdf
    -Ryan
    78 GS1000 Yosh replica racer project
    82 Kat 1000 Project
    05 CRF450x
    10 990 ADV-R The big dirt bike

    P.S I don't check PM to often, email me if you need me.

    #2
    Here's another one.

    Comment


      #3
      i know thats the one i used, it is just hard to read and kinda crappy, poor quality picture so i wanted to improve upon it for everyone. so i redrew one in cad (so it's exact) and put it in a pdf so it can be printed up to 10 inches or 8 inches useing a std 8.5 x 11 printer.

      ryan
      78 GS1000 Yosh replica racer project
      82 Kat 1000 Project
      05 CRF450x
      10 990 ADV-R The big dirt bike

      P.S I don't check PM to often, email me if you need me.

      Comment


        #4
        Sorry Ryan, I guess I misunderstood your post. The larger dial would be useful and make for more accurate cam timing.

        Comment

        Working...
        X