Announcement

Collapse
No announcement yet.

Front Wheel Thingys

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Front Wheel Thingys

    Do you really need the little tab pieces that hold the bolts on the front wheel for the brake discs ???? Would lock washers do the same ??
    Mine are pretty yucky

    #2
    If their appearance really bothers you - take them off and hit them with a wire wheel, then polish and clear coat - they'll look simply marvelous!! 8)

    Comment


      #3
      Go ahead and take the tab pieces off and replace them with washers. I would, however, put some Loctite on each of the six bolts. I would go farther (and I have!) -- replace all six bolts on each side with fresh new ones.

      With Loctite!

      Nick

      Comment


        #4
        Man, you've gotta love the auto-censor settings!!!

        Comment


          #5
          Originally posted by QuaiChangKane
          Man, you've gotta love the auto-censor settings!!!
          Perhaps the autocensor knows something about the alternative uses of this miraculous compound that we don't.

          Simon

          Comment


            #6
            I wonder if the auto censor will catch it this time. Here it goes:

            L O C T I T E


            Nick

            Comment


              #7
              the lock tabs do serve a very important purpose, that lock washers may fail to do.
              the brake rotors go through repedant heat cool cycles as you ride the heating causes the metal of the rotors to expant and the it contracts as it cools, the tabs prevent the rotor bolts from loosening and backing out due to there expanding and contracting at differant rates from the rotor it's self.
              Lock ti te will serve the purpose of the tabs and keep the bolts from loosening, but make sure to select the correct grade and type of lock tight.

              Comment


                #8
                Mr Focus is right the lock tabs are important,in racing they must be used or the bolts drilled and lock wired because it has been found this is the only safe way. why do you want to get rid of them ozman

                Comment


                  #9
                  I would keep the locktabs unless you wire the bolts. Safety over looks in this case.

                  Comment


                    #10
                    I agree, clean 'em up and put 'em back on!!! Do you really want to screw around with (IMO) the most important part of the bike!?!?!? 8O

                    Comment


                      #11
                      This is why I love this site !!!
                      Good thing I asked! 8O Never even thought of the reason they were there. Guess I'll be gettin the elbow grease out & cleaning them up.

                      Comment


                        #12
                        I love those technical terms "thingys" . Lockwashers will absolutely not do the same job. Definitely Loc.... , you know, the things in place if you take the tabs off.

                        Comment

                        Working...
                        X