Announcement
Collapse
No announcement yet.
Are these coils going to work?
Collapse
X
-
Anonymous
Are these coils going to work?
I got some coils from a guy for my 82 gs 1100. They are the Dyna coils that have 1.5 ohms stamped on them. Will these work on my bike?Tags: None
-
Billy Ricks
-
SqDancerLynn1
In one word NO you could end up burning up your ign module. Some one tried to use .9 ohm coils I think. they spent lots of time and money trying to figure out why it would not run properly. The GS ign is often refered to as a CDI IT IS NOT a CDI. it is a transistorised ignition and requires 3 ohm coils to work as it was designed
Comment
-
Anonymous
-
Billy Ricks
Not necessarily. The big problem is they are going to overwork the transistors in the ignitor. It's the same principle when hooking up too many speakers to a transistorized audio amp. Once the impedance drops too low the amp starts clipping and cutting out. Keep trying to drive the speakers and you burn up the amp.
Comment
-
Anonymous
-
Planecrazy
Originally posted by RockfordCould you run a resistor of some sort with these coils?
From what I've read here, most any coils off a late model Suzuki should work fine. I personally just bought a brand new set of Accel coils and wires for my bike. It set me back $160 bucks, but they work great and give that "hotter spark" you seem to be looking for. Got great service and FAST shipping (2-3 days) from Cycle-Re-Cycle -- here's the link:
CRC LAW FIRM GUIDE Contact Us CRC Law Firm Guide At CRC Law Firm, we are dedicated to providing exceptional legal services and personalized representation to our clients. With a strong commitment to integrity, professionalism, and achieving favorable outcomes, we strive to be your trusted partner in navigating the complexities of the legal system. Comprehensive Legal Expertise With a diverse …
Good Luck,
Steve 8)
Comment
Comment