Intake cam on the exhaust side of Suzuki's Falcon

[RacingJake]

I've heard that if you install an intake cam on the engine exhaust side on Suzuki's 1300 Falcon you can get more power out of it.

So what do think would happen if I did the same thing to a 82 1100E ??

Jake

[HiSPL]

I dunno.......Metal shavings? :roll:


Plenty of raw material for "motorcycle art"

[AOD]

what are the cam profiles for the engine?

[Anonymous]

In "80" & "81" the 1100 E intake cams had more lift & duration than the ex. cam. In "82" Suzuki increased the ex. cam lift & duration so the cam specs for the int. & ex. are almost identical for the "82" &"83" models. If you had an "80" or "81" 1100 E you could put in a "82" or "83" exaust cam for a slight preformance improvement. It seems it would take an awful lot of figuring to figure out the cam sprocket arrangement, to get the cam timing right with a int. cam on the ex. side.