Announcement

Collapse
No announcement yet.

hi i have a ? for some carb pro?? i have a 1978 gs1000 drag

Collapse
X
Collapse
 
  • Page of 2
  • Filter
  • Time
  • Show
Clear All
new posts
Previous 1 2 template Next
    #16
    not carbs

    i feel like a bloomin idiot the guy hears the bike start feels my header no fire on the inside two cylinders duh i guess somethime we forget to check the most simple things????.it has a after market igntion set up so im going to ebay to look for some parts

    Comment

      #17
      Re: not carbs

      Originally posted by michael kinder
      i feel like a bloomin idiot the guy hears the bike start feels my header no fire on the inside two cylinders duh i guess somethime we forget to check the most simple things????.it has a after market igntion set up so im going to ebay to look for some parts
      I would check for loose/bad connections and general electric continuity too see where the juice stops before spending money on new parts.

      Comment

        #18
        CARBS

        I WENT OUT AND PULLED MY IGNTION TRY IT ON ANTHER BIKE AND IT WORKS PUT IT BACK ON MY BIKE SAME DEAL THEN I GOT OUT A CAN OF STARTING FLUID SPRAYED THE INSIDE TWO FILTERS AND IT RUNS OFF IT. I GUESS MY CARBS HAS SOMETHING BLOCKING THE FUEL.

        Comment

          #19
          I would say run vacuum on it. it goes 1234 if you are sitting on the bike from left to right

          Comment

            #20
            carbs

            im not getting nothig out of 23 carbs if i spray starting fluid in them they fire

            Comment

              #21
              sounds like you need to clean your carbs. but first see if you have spark at cylinders 2 and 3

              Comment

                #22
                carbs

                good spark i can even shoot starting fluid in the brathers and they hit and the motor revs hard i have some picture as soos as wifey gets them on for me..

                Comment

                  #23
                  time to clean the carbs, there is a real good manuel posted on this site that gives you step by step. my bike was doing the same thing and then i clean the carbs and it is awsome. just take your time cleaning them and use a imapct screw driver to take the screws out. before you think about hooking the gas back up install a inline fuel filter.

                  ryan
                  78 GS1000 Yosh replica racer project
                  82 Kat 1000 Project
                  05 CRF450x
                  10 990 ADV-R The big dirt bike

                  P.S I don't check PM to often, email me if you need me.

                  Comment

                    #24
                    carbs

                    fuel filter my first thought. i know thats what got me in this mess because i just went through the carbs the fuel supply is in the middle so im guessing the 2. 3. carbs got the trash first.did you all see the pics of ny bike ?

                    Comment

                    Previous 1 2 template Next
                    Working...
                    X