OK I'm Stuck - Non-GS Technical

[earlfor]

Justin.......where are you now with the coil replacement and voltages?
What are you getting for input volts to both coil primary terminals compared to what your battery voltage is?

Earl

[quote="bustinjustin2k"]

I noticed you said Earlfor was helping you, any friend of Earl's is a friend of mine. Sadly I dont

[bustinjustin2k]

I'll start a new topic so I dont take over hoomgars topic.

[Hoomgar]

BOOO!!! YEAH!!!!

putt putt putt sputter sputter pffffft blap blap vrooom! VROOOOM!!!

WooHoo!


I got me a motorcycle people I am the happiest guy in this part of the hemisphere right now!

It was that stupid broken wire. Bike is running!

Thanks overboardkat, that narrowed it down man.

Guess who is riding this weekend?

Rock on!

[Hoomgar]

My apology Mark. One thing and another, I havent been online as much as usual lately. You could have PM'd me though. I at least check mail everyday even if I cant be online much.

I will wait to see what happens with the apparent lack of continuity you have found before making any more suggestions.

Earl

Come on Earl, don't be afraid to dive back in, I know your thinking about this, give me your thoughts

Earl, no problem at all buddy. I didn't want to bug you to much because I felt I was pulling on your chain enougn already. I noticed you weren't posting a lot lately and was getting ready to PM you just to see if you were OK. You helped me a lot man It's running

[earlfor]

You havent bugged me at all Mark. I'm happy if anything I say proves to be useful. :-) Congratulations to kat for suggesting the winning lottery number. :-) .........and to you Mark for buying the right ticket. :-) Now go ride until your butt is numb. :-)

Earl

[

Earl, no problem at all buddy. I didn't want to bug you to much because I felt I was pulling on your chain enougn already. I noticed you weren't posting a lot lately and was getting ready to PM you just to see if you were OK. You helped me a lot man It's running

[saaz]

Knew it had to be a break in the circuit somewhere. Internal breaks in wires are hard to track down, usually only found after testing every wire! I have had pin connectors burnt out and with pins pushed back in...electrics can be frustrating!

[Anonymous]

hey hoomgar;

Congrats!!! Ride man ride, put some serious mileage on that puppy.
Just don't forget to go back home, otherwise you'd probably land up in atlantic city or someplace like that and your wife would ground you. 8O

[Hoomgar]

hey hoomgar;

Congrats!!! Ride man ride, put some serious mileage on that puppy.
Just don't forget to go back home, otherwise you'd probably land up in atlantic city or someplace like that and your wife would ground you. 8O

I was up until 2:00 AM last night putting it all back together and adjusting it. I took the lame bars off of it that come with those bikes and put a pair of GS1000 bars on it that I bought off ebay two weeks ago for just that purpose I also put a cheap Emgo quarter fairing on it and tightened the loose triple tree assembly. It looks and feels way better with the new bars on it and it runs better now because it has a GS part on it

I am finishing these posts and my coffee and then it is off to the roads!

Thanks again to everyone who helped me trouble shoot this.