Announcement

Collapse
No announcement yet.

Taking apart a GS1000S dashboard.

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    #16
    hi

    To test the fuel or temp guage ,,,
    Minus pole to minus on meter.
    Plus 12v on plus on meter.
    A resistor between sense and minus.
    0 ohm is full on fuel or 170 gegree C on temp,
    100 ohm is emty on fuel or ca: 50 degree C on temp.

    I know ,,just made a temp meter from a extra fuel guage.
    The one between the two clocks, fuel meter is in my right clock..
    (Bought some clocks from a GS750L I think it was.)

    Temp sender I have mounted in the oil drain plug.
    With 10MM tread
    GS1000GLx

    Einar Skog
    Norway

    Comment

    Working...
    X