Announcement
Collapse
No announcement yet.
GS 1000 timing
Collapse
X
-
Anonymous
GS 1000 timing
looking for help on timing a 78, GS 1000. Need to know both valve and points timing if possible.Tags: None
-
focus frenzy
ignition timing should be 17* btdc below 1,500 rpm or 37*btdc above 2,350
the points gap should be 0.3-0.4mm or 0.012-0.016in
-
AOD
be sure to verify that the mechanical advancer wheel is not frozen. you should be able to turn it 1/4 turn and watch the weights move outward.
~AOD
Comment
-
Anonymous
Whoops, Sorry guys Guess I didn't put in enough info as to what I needed.
But what i need is how to set up the timing marks on the cam sprockets with the t and f marks on the contact breakers (points) plate.I also noticed a notch on the end of each cam, they are on the end towards the right side or points side of the bike. Can these also be used as timing marks to set the timing.
Comment
Comment