GS 1000 timing

[Anonymous]

looking for help on timing a 78, GS 1000. Need to know both valve and points timing if possible.

[focus frenzy]

ignition timing should be 17* btdc below 1,500 rpm or 37*btdc above 2,350
the points gap should be 0.3-0.4mm or 0.012-0.016in

[AOD]

be sure to verify that the mechanical advancer wheel is not frozen. you should be able to turn it 1/4 turn and watch the weights move outward.

~AOD

[Anonymous]

Whoops, Sorry guys Guess I didn't put in enough info as to what I needed.
But what i need is how to set up the timing marks on the cam sprockets with the t and f marks on the contact breakers (points) plate.I also noticed a notch on the end of each cam, they are on the end towards the right side or points side of the bike. Can these also be used as timing marks to set the timing.