Announcement

Collapse
No announcement yet.

Does a GS1000 exhaust fit a GS1000G ?????

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Does a GS1000 exhaust fit a GS1000G ?????

    Hy,
    I have a 1979 GS1000G and I would like to know if a GS1000 exhaut would fit my bike?
    Thank you for your advices.
    Olivier

    #2
    The main difference between the G & E model GS1000 is the chain versis shaft SO it should fit. The only other consideration is weather it is an L model which would be different
    GS1000E/G/GL/L/S 78-80 aqll use the same Vance & Hines exhaust

    Comment


      #3
      Hey there Olivier hows the bike getting along?

      Comment


        #4
        The bike looks like a bike again :-) .
        I still have to rebuild all the wiring loom (which I really dislike), find side panels and an exhaust ....
        It is progressing slowly.
        Thank you very much for asking.

        Thank you also for the answers. Does any other exhaust would fit my bike. I have an "old" GS750 exhaust, the tubes are the same diameter, the exhaust fits in place but not the clamps to fit to the engine (holes are too close not wide enough). I was thinking of exhanging these clamps but I dod not know how to proceed as the exhaust is in one piece...

        Olivier

        Comment

        Working...
        X