accel ignition wires

[rosco15]

I want a set of 8mm accel wires with straight boots that will fit my dyna coils. I was told that a set for a mid 60's car, pre hei, would fit. Anyone have any experience with this or know a part # that would work. I looked in the archives, but found no specifics.

[SqDancerLynn1]

I would check for a set for a Honda 80-90s Honda Civic or similar 4 Cyl
Or get a universal set with str8 ends for a 4 cyl

[SqDancerLynn1]

Checked Summit No listing Cheepest way would be to get a universal set for 70's vintage Dodge/Ply 318/360 They will work should be able to get them at PepBoys etc for around $25 you will have an extra set to sell to a friend

[Anonymous]

i thought the dyna coils took 7mm wires for the jap bikes

[Motorcyclemodeller]

I use 8.8 Accell Fat Stuffs, just get a universal kit for 4 cylinders. They come with enough wire for any bike and various ends for any application.

8) Dr. Dre 8)

[rosco15]

I just picked up a set of accel 8mm spiral core wires part# 5040y with the straght boot. I also got a set of straight socket type boots part #170070 made by accel. I ordered them from summit. I have enough wires and connectors to do 2 complete sets. They look great on the bike.