Announcement

Collapse
No announcement yet.

lagging revs

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
    #1

    lagging revs

    I have a 1980/81 GS1100 EX

    i have just put the carbs back together and after starting up the bike i notice that when i blip the throttle the bike is taking its time in coming back down to idle. What component might be failing to cause this lagging of the revs, or could this be attributed to an airleak?
    Tags: None
    #2
    Did you sync the carbs?

    Comment

      #3
      no i did not synch them. This is mainly because i cannot access the air screws. Unless there is another type of synching which you are talking about. Though the main reason i did not resynch is because the bike was not lagging origionally, and i did not change anything with the air screws.

      Am i mistaken as to how to synch and can you refference me on how to do it?

      Comment

        #4
        synching refers to the flaps that the throttle cable is connected to?

        Comment

        Previous template Next
        Working...
        X