Announcement

Collapse
No announcement yet.

Need to find jets for Mikuni 32mm

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Need to find jets for Mikuni 32mm

    Where can I find different sizes jets for my Mikuni 32mm carbs? Online preferred. Anybody know the size of original main jets in these carbs?

    #2
    MArk I know this doesnt help you now but I'm tearing apart and cleaning mine next weekend. I can check then. I have a set of 32's off the bike but they are from an 84 750 and I dont know anything else about them.

    Comment


      #3
      I have 83 GS650GD

      HI
      I have 83 GS650GD
      32MM Mikuni BS32SS carbs
      Main jet is #110

      I have the shop manual so FYI
      Fuel level 5mm +-1mm
      float hight 22.4mm +-1mm
      main air jet 2.0
      jet needle 5C45
      needle jet Y-7
      Pilot jet #92.5
      bypass 0.8,0.7,0.8
      pilot outlet 0.7
      throttle valve #135
      valve seat 2.0
      starter jet #45
      pilot screw (preset) 1-1/2
      pilot air jet #160

      Hope this helps
      Bob

      Comment


        #4
        jets

        One thing I've noticed with all my escapades is that even though a number of GS's use the same carbs, the jet sizes vary based on the size of the engine. If you check the schematic on Bike Bandit, the jet sizes are listed in parenthesis next to the part title. Good luck!!
        1980 GS1100E....Number 15!

        Comment


          #5
          Online you can also check with www.Sudco.com if you send them a DETAILED email they will help with getting you the correct replacement jets for application and changes made

          Comment

          Working...
          X