Announcement

Collapse
No announcement yet.

Make your own wiring harness?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Make your own wiring harness?

    We all know how hard it is to fine MINT condition wiring harnesses...but I was just thinking: How difficult would it be to MAKE one? Anyone ever tackled this before?

    Rudi

    #2
    I've done it.
    Not very difficult, but you have to pay attention to what you are doing
    The first thing I did was to create a simpler (more readable) version of the wiring diagram.
    I chose to use new, non original connectors, meaning I had to resolder everything. On the other side it's nice to know everything is new and not rotted out :roll:
    Then just build up your courage to rip out the old harness, there's a lot of connections to remember...

    My drawing is found on my site under 'modifications/wiring', there's also a few pictures from the construction of the harness under 'my bike/2000'.

    Comment


      #3
      It might be helpful to post a shortcut to your "site". 8O

      Comment


        #4
        Just click the little house at the bottom of my message !

        Comment


          #5
          Hi mate if you want a colour wiring diagram try this site http://www.gsx1100.com/motor/gtips.h...ator/rectifier
          got some good uns

          Comment

          Working...
          X