83' 1100E cyl #2 slow to warm up

[Anonymous]

When I first start my bike up, #2 cylinder stays cool to the touch for the first few minutes where the other 3 are hot like they're supposed to be. It does warm up eventually and seems fine to ride and does seem to reach the same temperature as the others. I've installed a Stage # jet kit and have been through the carbs several times. #4 used to do the same thing and after my last thorough cleaning, it's fine now but # 2 is still doing it. Any ideas what to check?

[Anonymous]

look at your spark plug--the diaphram in the petcock could be leaking-It is connected to the #2 carb

[Anonymous]

look at your spark plug--the diaphram in the petcock could be leaking-It is connected to the #2 carb

I know the petcock does'nt leak when it's not running or when the tank is of the bike. is there a way to tell if it's leaking into the vacuum port on the carb other than the plug because it will warm up eventually?

[SqDancerLynn1]

Check the vacuum hose for fuel after running the bike for a few minutes

[Anonymous]

I checked the vacuum line and it's bone dry. It almost seems that it's not firing when the choke is on full and as I ease the choke off, it warms up a little more.

[earlfor]

The internal passageway between your main jet and fuel pilot is still blocked.

Earl

I checked the vacuum line and it's bone dry. It almost seems that it's not firing when the choke is on full and as I ease the choke off, it warms up a little more.