1978-1988 Mikuni Carb Manuel

[mpinkorea]

I could download it but could not open, something about not being coded correctly. I have acrobat 7.0. Please help.

[first timer]

the link is now active, it got broken some how, so just click on the link in the begining of this thread, also the file is password protected so read the full post with the link to get the info.

-ryan

[styrene]

can't unzip

I can't unZip this file ... I'm on a Mac and I've tried 5 different programs - tried Stuffit 9.0, Zipit 2.2.2, GUI Tar and UnTar ... I have'nt seen any options for entering passwords anywhere and I
keep getting an error when I try to decompress
Any advice ?
thnx

[jrp]

Ryan, when you uploaded the zip file something got corrupted. Try again.

Thanks,
Jeff

[ptm]

I get the following when I try to unzip it:

error...missing 13244 bytes in Zip (attempting to process anyway)

When I click OK it says it's corrupted or not a valid archive.

[christopher_2]

My computer says that also.

[koolaid_kid]

I get the corrupted file message. To enter the password, right mouse click on it and select "Extract all". This gives you a password option.

[saaz]

I have some old catalogues and books that I should do as well someday. makes me inspired!

[first timer]

i will repost and verify the pdf tonight

-ryan

[first timer]

i reposted the file, i also downloaded it and extracted it and was able to read it. some one please let me know if it is ok for them. everything still applies from the begining of the post.

-ryan

[83GS1100E_Tornado]

Carbs

Hmmmmm. I'm just dumb, but I don't see the carbs I just rebuilt in there? I have a bone stock 83 GS1100E, what carb "model" did they come with factory? Also, when ordering air filters, what size mm would I need? Thanks for the download!!!

[ptm]

It works now. Thanks!

[koolaid_kid]

Thanks, Ryan.

[koolaid_kid]

Factory carbs for a 1983 GS1100E is the Mikuni BS34SS. And you are correct, they are not in there. Shame, because I have 2 bikes with that model of carburetor.
I take it that you are ordering pods? I don't know what mm they would be, but you might start another thread and ask that question. Mine is bone stock, but lots of folks put pods on this model.

[styrene]

Repost worx great !

i reposted the file, i also downloaded it and extracted it and was able to read it. some one please let me know if it is ok for them. everything still applies from the begining of the post.

-ryan

Thanx for the repost first timer, unzipped great and it looks beautiful. Thanks alot.