Brake Fluid Sight Glass

[sebby110]

HowwDee to all;

Hope you've been enjoying this fine weather, and riding plenty.

Question:

I have question relating to the sight glass on the brakes reservoir.
The round vision glass, to see the brake fluid level, is old. It has that crazed, dried-out look. I can't even tell the exact fluid level. I'm not too comfortable with that. 8O
Can you just replace the sight glass or do you have to replace the entire master cylinder reservoir ??? Is there some "repair kit" manufactured ??

Thanks for any help.
Sebby 110

[first timer]

here you go.

http://www.crc2onlinecatalog.com/master_cylinder_reservour_kits.htm

-ryan

[sebby110]

Ryan;

Thanks...that was quick.

I went to the link and it only listed Honda Reservoir Kits. Couldn't find the Suzuki application.
They do have a Suzuki Mstr Cyl rebuid kit...but not a reservoir kit.
Are they interchangeable with the Honda ? Will the Mstr Cyl Kit solve my problem with the sight glass ??

Thanks

[SqDancerLynn1]

You can make a new window, use some 1/4" plexiglass and make a small circle to fit tight into the hole. I did one, here I removed the window and pluged it with an epoxie steel-- mixed it and over filled the hole, used two small pieces of wood and a small C clamp Squeesed it all together, then sanded the outside, added a touch of paint to finish it. Clean it very good before you reinstall it