Announcement

Collapse
No announcement yet.

Ever used epoxy in direct contact with gas?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Ever used epoxy in direct contact with gas?

    I fixed a rusted out fuel sending unit with epoxy once and it worked, but that wasn't constantly bathed in fuel. I cracked a fuel tee removing a set of carbs and it looks repairable if I use the right glue. Thanks, Ed

    #2
    go to a auto parts store thay should have a epoxy for fuel tank repair. wal=mart some times carrys it.

    Comment


      #3
      Go to a marine dealer ansd ask for marine tex. It will seal a tank. Great stuff!

      Comment


        #4
        Is a fuel tee that expensive?? I would think that you could acquire a replacement tee at an auto parts store that would save you the time and effort involved in repairing the old one. ...or am I missing something here?

        Just a thought,
        Steve 8)

        Comment


          #5
          Not the fuel tees for our carburetors on our GS bikes.
          I never saw one at any auto shop that would fit my CV carbs without extreme modification.

          Dm of mD

          Comment

          Working...
          X