Announcement

Collapse
No announcement yet.

THE GS GODS HATE ME!

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    THE GS GODS HATE ME!

    ok, i have fixed the first screw problem that i had, and another one arises! I chenged the oil and when i clean the are up i see that the threads on the bottom post that holds the plate on is stripped.... now, how do you fix that???

    PLEASE HELP ME!!!

    Justin

    #2
    Easiest way is to use an oversized self tapping drain plug, or use a helicoil to rethread it, get a new/used oil pan

    Comment


      #3
      I think he means the bottom stud for the filter plate.

      Harrison

      Comment


        #4
        Besides, the GS gods don't hate you. They don't have time, all their efforts are dedicated to hating me....


        Comment


          #5
          Hey, these are unbiased, nonbigotted, non-discriminitory gods . They hate everybody equal.

          Harrison

          Comment


            #6
            yes, it is the botton stud on the filter plate....

            Comment


              #7
              I believe that these are double ended studs. Heat the stripped stud red hot and then cool it fast acouple of times. This will break the grip of the aluminum on the stud and you may be able to remove it with visegrips. Alternately, you could try treading it to a smaller size if you have a die set.

              Harrison

              Comment

              Working...
              X