Announcement

Collapse
No announcement yet.

Gasket Sealer on OEM Crank Cover Gasket?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Gasket Sealer on OEM Crank Cover Gasket?

    Looking for recommendations.

    I'm doing the infamous GS electrical rebuild right now and was wondering if anyone has advice on using aditional liquid gasket or sealant on the new rplacement OEM gasket.

    Thanks for your advice in advance.

    Nick

    #2
    Well, I use Three Bond 1104, aka Yamahabond, as a matter of course but I would check with the dealer's techs. I know these gaskets have been superseded many times by Suzuki and that the newer ones install and remove clean without any gasket cement.

    Comment


      #3
      Just a touch around the rubber at the wiring. Yamabond or eqivalent will be fine.

      Comment


        #4
        Thanks for info. I'll check out what type of gasket it is first but applying some 1104 around the rubber gasket is a great idea. Thanks!

        Comment

        Working...
        X