Announcement

Collapse
No announcement yet.

Front brake install question

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Front brake install question

    I've had the front brake off my GS450 for several months now. I am ready to reinstall it and the rotor doesn't want to slide back over the axel hub. Both are clean. It just sits on top without sliding down into place.

    What am I missing?

    The service manual doesn't mention anything other than torqueing the bolts.

    I don't think it needs to be forced or hammered into place.

    What gives?
    Thanks

    #2
    If it's anything like a car it just needs a quick sand papering of the edges. If you force it it will warp. It came off easily right?

    Steve

    Comment


      #3
      That didn't help. Thanks though.

      It's not like it just barely won't slide down.

      It IS the rotor that came off the bike.

      I have another bike just like this one and the rotor is flush against the wheel.

      It's always something. LOL

      Comment


        #4
        I feel like a dumbass

        Thank goodness for Bike Bandits micro fiche.

        Comment

        Working...
        X