.png "Powered by vBulletin")
It's a 2 valve, chain drive model.
Thanks Jake
Thanks Jake
-
1166cc 1/8 ET 6.09@111.88
1166cc on NOS, 1/8 ET 5.70@122.85
1395cc 1/8 ET 6.0051@114.39
1395cc on NOS, 1/8 ET 5.71@113.98 "With a broken wrist pin too"
01 Sporty 1/8 ET 7.70@92.28, 1/4 ET 12.03@111.82 -
Yes. -
Like he said.Originally posted by robinjo
Comment
-
I think that all GS series bikes have rollers.Comment
-
By "rollers" does that mean the crank is on roller bearings?Originally posted by 80gs1000e
This site's article on the GS engines says they all have roller bearings except the 450.
DaveComment
-
Thanks guys, that was what I was hoping since I don't have the book yet.
Add a big yeap on the roller is a bearing on the crank.1166cc 1/8 ET 6.09@111.88
1166cc on NOS, 1/8 ET 5.70@122.85
1395cc 1/8 ET 6.0051@114.39
1395cc on NOS, 1/8 ET 5.71@113.98 "With a broken wrist pin too"
01 Sporty 1/8 ET 7.70@92.28, 1/4 ET 12.03@111.82Comment
-
no they don't all have rollers, the 16 valve 750 went to a plain shell bearing, with high pressure oiling, the 1100 retained the rollers though, that's why one of the performance mods is to use the oil pump gears from a 16V 750Comment
-
From the microfiche it appears that the 400E has plain bearings since they offer an assortment of undersizes.
SteveComment
-
You are all correctComment
Comment