GS 450 L

[Anonymous]

Does anyone have color pictures they could send me of the correct wiring behind the headlamp on my bike. I tore it down to remove rust and clean the chrome and now I am not sure how to wire it back properly, and do not have enough "male" ends for the "female" ends... I remember behind the lamp when I fisrt took it loose, that their were extra wires. and on the left side under the plastic cover the solenoid has 2 wires attached does the black go on the left and the yellow on the right??? I am really confused any help is appreciated. Next time I will label properly. this is awful.

thx,

Rosco

p.s.: the bike was running fine 2 days prior, now I get no lights on instrument panel, but motor spins over easily when I touch the two batter cable post on the solenoid with large flathead screwdriver....???

[Anonymous]

I don't have any pictures, but there's a wiring diagram on the net:

http://www.twostrokes.com/Technical/wiring_diagrams/Suzuki/Four-Strokes/GS450LX_TX.gif

It comes from this site: http://www.twostrokes.com/Technical/technical.html

Hope this helps.

[Anonymous]

Here is a semi-colored version that I put together to help me straighten out my electrical problems. I think it is the same diagram as already posted.

[Anonymous]

thx

hey thanks guys .... got everything working like a charm now.


thanks for the help

Rosco