Announcement

Collapse
No announcement yet.

Possible to cross a Ignitor for a GS 300?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Possible to cross a Ignitor for a GS 300?

    GS 300 seem to be a very rare commodity out there and I need a ignitor. Is it possible to cross one from a different bike, or does anybody have any suggestions?

    Mike Kreese
    mkreese@mgvenergy.com
    403-899-5180

    #2
    I would think anything from a twin of the same vintage would work or could be adapted by rewiring if it is different

    Comment


      #3
      I sure hope so, because I think it's coming to that very soon

      Comment


        #4
        As Lynn said, the ignitor from any of the GS twins should work just fine.
        You may need a wiring diagram for both the donor bike and yours though as the color codes could be different. Dyna may make an "S" that would work for your bike. If not, the "S" is not a complicated setup and I am sure it could be fitted with a little work. Also, early GS twins came with points/condensor ignitions and it would not be difficult to install that type of ignition system either.

        Earl
        Komorebi-The light filtering through the trees.

        I would rather sit on a pumpkin and have it all to myself than be crowded on a velvet cushion. H.D.T.

        Comment


          #5
          Sounds Cool, but whats a "S"?

          Comment


            #6
            Dyna "S", its an electronic ignition system.

            Earl


            Originally posted by mkreese
            Sounds Cool, but whats a "S"?
            Komorebi-The light filtering through the trees.

            I would rather sit on a pumpkin and have it all to myself than be crowded on a velvet cushion. H.D.T.

            Comment

            Working...
            X