Announcement

Collapse
No announcement yet.

Almost back together...now electrical gremlins

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Almost back together...now electrical gremlins

    So the fuses are heating up but not blowing. Touch the fuse holder and you will receive a nasty burn. Ask me how I know!

    Any ideas? Bad ground?

    #2
    Bad fuse holder. Pretty sure.

    Michael

    Comment


      #3
      Originally posted by mopolopo
      Bad fuse holder. Pretty sure.

      Michael
      Absolutely.
      Look for corroded contacts and check the soldering points inside the fuse holder.

      Comment


        #4
        Once again, you guys are correct, at least it appears so right now. Cleaned everything up and we are running cool. WIll check again later to confirm.

        Thanks for the help.

        Comment


          #5
          you may need to clean all the wire connectors on the bike to help keep the fuses cool. if thay got hot and the solder melted there may be a few bad connectors.

          Comment

          Working...
          X