Announcement

Collapse
No announcement yet.

Need Help Please. RR insulated or not?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Need Help Please. RR insulated or not?

    I got an RR from a GS 750 to try on my GS 550T. I can't find the bolts I took off of it. I found some that will fit and can't remeber if it had rubber washers or not. Any help would be great thanks.

    #2
    Re: Need Help Please. RR insulated or not?

    You might want to verify that what you have is actually a combination regulator/rectifier. When I replaced the regulator and rectifier on my 79 GS750 E. they were two separate components.
    The rectifier was located under the left side cover. The regulator was bolted to the underside of the battery tray. Neither of them is isolated. They were grounded by their bolts to the frame/flanges on the bike.

    Earl


    Originally posted by moonshine550t
    I got an RR from a GS 750 to try on my GS 550T. I can't find the bolts I took off of it. I found some that will fit and can't remeber if it had rubber washers or not. Any help would be great thanks.
    Komorebi-The light filtering through the trees.

    I would rather sit on a pumpkin and have it all to myself than be crowded on a velvet cushion. H.D.T.

    Comment


      #3
      if it has the same # of wires it should work,

      Comment


        #4
        Thanks guys. I figured it out, it isn't. But the replacement was used and I found that it doesn't work either. So I guess I should bite the bullet and spend the money on a new one.

        Comment

        Working...
        X