Announcement

Collapse
No announcement yet.

Need help with float height and jet sizes

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Need help with float height and jet sizes

    Please help. I urgently need this information:
    Standard main jet size and float height for a 1982 UK spec GS1000G.
    It has 34mm CV carbs. Manual ordered for it but still waiting.
    Thanks.

    #2
    I can get this for you when I get home from work today if nobody else posts it before then.

    Comment


      #3
      Thanks, I'd really appreciate it. Am I right to assume the valve clearances are the same on all the 8 valve engines-0.03mm-0.08mm cold?

      Comment


        #4
        Sorry, I almost forgot. How many turns out for the air screws to start with?

        Comment


          #5
          I missed the part where you mentioned it was an 8 valve engine. I've got the manual for the 16 valve motors only and I don't know that the carb specs would be the same.

          The float level for the 34mm CV carbs used in the 16 valve GS1000 is 22.4 mm and the main jet size varies for the different models and range from 107.5 to 112.5.

          Hopefully someone with an 8 valve manual can help out here.

          Comment

          Working...
          X