parts interchange

[Anonymous]

I have a 1150 1984 can model.

I also have the manual from suzuki ,the manual says its good for 1150 can model and gsx 1100 us model


I'm now rebuilding my motor but web site with parts are hard to find for my model and so easy for the 1100

I just want to know if 1100 1983 can fit on my 1150 1984 ??

Parts to buy: all valves, valve seals,gasket ,piston rings,valve spring and other things


Thanx for all your answer

excuse my english

[SqDancerLynn1]

Just look up an 84 1150E the differences between US & Can models is mostly cosmetic / Carb Jetting the engings are the same
Check here for part #s http://www.alpha-sports.com/suzuki_parts.htm
If your head needs as much as you describe I would look for another good used head

[Anonymous]

thanx sqdancerlynn1

you answer me well.

you think that I should change the head instead of rebuilding it ?

[SqDancerLynn1]

It should cost $600 to do a valve job/ mild port work on the head NOT everything will need to be replaced Check with APE or Cycle Concepts ?? If you replace all of the valves and springs You will spend $1000 +

[SqDancerLynn1]

APE- Gixxerzone 1-818-842-4952 Calif
Cycle concepts 1-972-377-0889 Texas ???????

[Anonymous]

thanx again

[SqDancerLynn1]

I may have miss posted
Cycle Concepts- High Performance Specialists
1625 Lynwood Dr
Lancaster,SC 29720
803.285.8093