rpm

[daveo]

you can remove the valve cover and apply some hi-temp RTV to the round side of the half-moon plug, but if the shop did a valve adjustment, they should (IMO) put the thing back together correctly, ie. so it doesn't leak, but it may be faster to just do it yourself

[ard]

leak

Hi Dave, I agree with you, I could do it myself even if I have to take the valve cover off and re do, however the guy at the repair shop told me to bring it back asap, and luckily I have my 1983 GS750E to ride which I enjoy very much.

ard \/

[earlfor]

Yeah, those half moon rubbers are notorious for aging and starting to weep.
Removing the valve cover and dabbing some silicone is the easiest way.

Earl

you can remove the valve cover and apply some hi-temp RTV to the round side of the half-moon plug, but if the shop did a valve adjustment, they should (IMO) put the thing back together correctly, ie. so it doesn't leak, but it may be faster to just do it yourself