Anyone know where to get one of these?

[dpep]

or something close?

It is the socket for the running/turnsignal lights in the Vetter Winjammer fairing. I emailed Craig Vetter on his website. He emailed me back that he didn't have any and had no idea where I might look. He couldn't remember for sure, but his recollection was that it was a Chyrsler part.

[Anonymous]

Try Fleet Truck Parts at the corner of Beaver St & Edgewood Ave.in Jax, they have a lot of Light sockets of all kinds , you should be able to find something there that you can make work

[Planecrazy]

Don't bother, Don ... I have an extra one I'll send with the other stuff I'm about to ship to you...

Steve 8)

[gremlin]

go down to your local autoparts store thay will have the part you need. you may need to look around abit to find the match but most of the car sockets will match the bikes. you will need to look around the same year the bike was built.

one day i will get the camra and a tail light to fix and show the hole deal from start to finsh.

[Planecrazy]

You can stop posting D on this ... I'm already sending him one...

Steve 8)

[earlfor]

Hey, lets all send him one. It'll drive him crazy. :-) :-) :-)

Earl

You can stop posting D on this ... I'm already sending him one...

Steve 8)

[Planecrazy]

Steve 8)

[dpep]

You can stop posting D on this ... I'm already sending him one...

Steve 8)

That's okay, Steve. Thanks to you I've got my immediate need resolved, but this is all good knowledge to have for when the other side eventually breaks.

[redliner1973]

Fabrication is a must with the priviledge of GS ownership!!

[pidgey]

Yeah, they tend to corrode up inside if the rubber lens seal fails and moisture gets in there. I had issues with mine, so I cleaned 'em all up and re - soldered all the terminals. Also added solder to the bulb contacts just to be sure