I need help with me 80 550e

[Anonymous]

For those of you that went on the Texas Hill Country ride , this is Ryan.
We just got back from the 750 mile hill country ride and the next morning I got on the bike started it up and it ran real choppy, It was raining so I didn;t think anything of it, but the next day it was worse. It would not hold an idle , meaning it would die when you let off the gas. I checked the bowls they all have gas, but I just checked spark, and only one of my plugs is firing. The other day full throtle only yeilded 6k rpm and today it was only 2k.

The coils are new off a 650, the plugs are new and the wires are new

Can anyone help me???

[Anonymous]

Did u install the coils right? Check all your connections.. Sometimes they work loose....

I was just working on mine last night, and it wouldn't even run with 2 unhooked, i can't imagine it starting with only one plug firing...

something's fishy...

[Anonymous]

I know the coils were on right because I have been running them as is for over 1000 mile without a problem, I think I have narrowed it down to my ignitor

[Anonymous]

Thanks for your info, I got into my ignitor and relized it was bad so I am converting to the Dyna s system