Top End Speed

[shaftzuki]

I'd have to agree with Leon - I'm running just under 4k at 60 ... 8)

[Anonymous]

Top End Speed

Yes!

I will check speed with my handheld GPS and see what it reads in comparison.

As for tach I have a tach/ dwell meter and it seems prety close.

thanks for the tip about top speed. You only know that fact because of math equasions right......... not from experience

[banditom]

speedo error

When I first got my glz running, it seemed I was going much faster than what the speedo was indicating. INDEED, at an indicated 55, I was actually doing 65 as compared to a comparison with Julies Equinox. I cant speak to how close he speedo on the equinox is, but Ive never had reason to question it. Indeed, maybe a run with the gps is a good idea for you to check that speedo. For whatever its worth, the tach on mine doesnt work either, haha.

[Roger P.]

Considering how many different rear ends that oil seal cross references to in the thread about the 850 in Argentina, has anyone ever researched a rear-end swap from another Suzuki? Yamaha shafties almost all used the same rear end, from 650cc to V-Max/Venture. The guys at XS11.com found a useful drop in revs swapping in an XS750/850 final drive.

[1980GS1000E]

At least you won't have to worry about wheelying.

[7981GS]

Considering how many different rear ends that oil seal cross references to in the thread about the 850 in Argentina, has anyone ever researched a rear-end swap from another Suzuki? Yamaha shafties almost all used the same rear end, from 650cc to V-Max/Venture. The guys at XS11.com found a useful drop in revs swapping in an XS750/850 final drive.

The final from an M109 is a direct fit.
Just has a larger/longer drive-shaft.

Daniel

[gmansyz]

Taller Rears???? High heels?

Okay, the 1200 Madura has a 32/11 versus the GS1000 34/11.
Then there is the GSX1100 G which had a 32/12 rear. You can figure that out, yes?
G

[Roger P.]

M109 final drive ratio would get you to about 3500rpm @ 60mph.