Announcement

Collapse
No announcement yet.

More grunt

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    More grunt

    I looked up the Wiseco website and their overbore kit is 1134, 2mm oversize with a compression of 10.25. Would you consider this to high for the setup I,m running? Sidecar etc. Regards Paul

    #2
    you probably should run premium but it will be ok. If you want to lower it put a thicker base gasket on

    Comment


      #3
      On another note, what comp. ratio is considered too high (for street riding/pump gas)? 11:1? 12:1? Just thought I'd ask!

      Mitch.

      Comment


        #4
        If you want to be able to buy gas at the pump I would not go over 10.5/1
        The new bikes are able to run higher compressions because of advances
        in piston & cylinder design, computer controls & being water cooled

        Comment

        Working...
        X