Announcement

Collapse
No announcement yet.

Help 1983 GS750T

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Help 1983 GS750T

    Hi,

    Im picking up a 1983 GS750T this weekend and need to know the height of the bike. It does not have the faring on it or the sissy bar. I rented a chevy cargo van and want to make sure it will fit inside.

    Thanks

    Chris

    #2
    You may have to rotate the bars down , but it should fit.

    Comment


      #3
      I really need a measurement from the ground to the top of the handlebars. "should fit" wont work as the distance to pickup the bike and the cost of renting the van.

      Comment


        #4
        Is there any possibility of dropping the front end a few extra inches by loosening the clamps on the front forks and allowing the bike to slid down a bit?

        From memory and estimation my guess is 45?3 inches to the top of the bars. I just want to see how close I am when someone who can measure theirs comes along. Don't take my word for it.

        Comment


          #5
          82 G750TZ

          just ran outside and measured mine, an '82 GS750TZ, top of the handle bar in the normal position is 48", if you drop the bars the next obsticle(sp) is the instrument cluster, 44".....Mike

          Comment


            #6
            THANKS SO MUCH!!!!!

            Comment


              #7
              Just remenber you can also let the air out of the tires!

              Comment

              Working...
              X