E bay purchase

[SqDancerLynn1]

What am I going to do ???? I have nothing they will fit. Just bought a set of SRAD 600 carbs with 2K miles on them for $23.00 I'm guessing they are 34mm ?? Thinking of modifing the spacing to fit 1000G motor

[Scud]

If it were me I would list them on Ebay and try to get $24.00.

Scud

[Katamaniac]

If they will fit a 93 600 Katana, I'll buy them from you.

[triffecpa]

I think that both of you are out of luck. The SRAD carbs are designed for a "downdraft" type of cylinder head, and thus have the carb float bowls tipped from horizontal. The 600 Kat uses "sidedraft" carbs with the float bowls 90 degrees from the intake.

[SqDancerLynn1]

What am I going to do couldn't pass them up for the price! They look like the tipical mikuni carbs ? advertised as fitting 96-00 gsxr/srad Wouldn't be the first time a seller didn't know what he was selling

[Katamaniac]

Thanks for the tip. I amin the middle of cleaning the carbs on the 600 Katana right now and there are a bunch of parts missing, so I am looking at a couple sets on e-bay to scavage parts from.

[ToddB3]

I'm not sure but I'll bet if you could find some 45 degree rubber tubing to fit your intakes and get creative with a mount to secure the carbs you could probably get downdraft carbs to work on a sidedraft engine.