Is my slide trashed? - Jet Kit Install

[Anonymous]

Measure the inside of the the part of the carb that slips into the carb boot (closest to the engine, not by the air cleaner). If it measures 34mm across then it's the same.

Ok, I'll get back to you tomorrow and let you know. Thanks again!

[Anonymous]

Measure the inside of the the part of the carb that slips into the carb boot (closest to the engine, not by the air cleaner). If it measures 34mm across then it's the same.

OK RJ, I do have the 34mm carbs. Let me know how you'd like to proceed.
Thanks.

[RJ]

Send me a zip code so I can calculate a shipping cost.

[Anonymous]

Send me a zip code so I can calculate a shipping cost.

Just PM'd you...

[Anonymous]

Here's an update - I finished the rest of the carbs today. All went well, thanks to the suggestions and ideas from everyone who replied.

I drilled the remaining three slides, that I didn't screw up, in 4 steps. I used 4 different sized bits from smallest to the one supplied in the K&N kit. It worked great and all wound up being the proper sizes and shapes....

RJ, as soon as I get that slide from you, the beast will live. :twisted:

[RJ]

It's on the way. Went to the NO Jazzfest today. No time for shipping. I'll get it out to you Mon or Tues. Don't worry about shipping costs. I'll make it a freebe. Just pass on a good deed to another when you get the opportunity.

[Anonymous]

It's on the way. Went to the NO Jazzfest today. No time for shipping. I'll get it out to you Mon or Tues. Don't worry about shipping costs. I'll make it a freebe. Just pass on a good deed to another when you get the opportunity.

That's great!! I really appreciate that, and I will pass on the good deed!!

[RJ]

Just sent the slide out this AM so you should get it back by the end of the week.

[Anonymous]

Just sent the slide out this AM so you should get it back by the end of the week.

Awesome RJ. Thanks a million.
Where are you located, BTW?

[RJ]

That would be New Orleans.

[Anonymous]

That would be New Orleans.

Cool. I bet that is a blast living there!

[RJ]

If you like hot weather, great food and music, it's right up your alley. In fact riding in the summer gets to be unbearable at times, so it's like winter for the Northern guys. Great time to crank on the fan and rip the bike apart for a long-term project.

[Anonymous]

If you like hot weather, great food and music, it's right up your alley. In fact riding in the summer gets to be unbearable at times, so it's like winter for the Northern guys. Great time to crank on the fan and rip the bike apart for a long-term project.

I can imagine...

I always wanted to get down there at least once for Mardi Gras. Someday...

[Anonymous]

RJ,

Got the slide today. Thanks again!

Hopefully I'll have this baby running Friday....