Put some RS38 Mikuni's on the 1168cc GS

[Anonymous]

I got some 38 RS flatslide Mikuni's and put them on my GS11 with the 1168cc kit. It has 1150 cams. The bike runs excellent, Power is up and I plan on running it at the track Thursday night. I have not finished the other motor yet so I am running this one. I have a 530 conversion with 17/39 gearing on GSXR wheels. I think I will change to a 15 front for the track. The bike is set at 65" inch wheel base right now. I tried it a few times on the back roads and it leaves hard but was slipping the clutch in high gear. I had robbed the lockup clutch off of it for my other motor. I have HD springs but it still slipped. I think I am going to order the APE clutch pack for it tomorrow. I'll post times after Thursday nights Test&tune. On a side note I was riding the GSXR testing out the new clutch plates and it broke the cam chain in 3rd gear. Broke both Web Cams and 2 rocker arms. It has a Cooper head and no telling how many valves are bent. Plus I had to push it 2 blocks to get home. The GS is still rolling!

[RacingJake]

Can't wait to hear the results.

I've been on the slidelines waiting for my rotor puller from DK to show up.