Announcement

Collapse
No announcement yet.

got some slingshot carbs.

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    got some slingshot carbs.

    Hi guys,
    I?ve just managed to get a set of slingshot carbs for the GSX1100.
    I have noticed what I think are 2 vacuum hoses at the top, two fuel intakes near the top of the fuel bowls, and also some sort of rubber inlet between carbs 2 and 3 in the middle (approx half an inch diameter), which I do not know what is for?
    Looks like I will need a fuel tap with 2 outlets and a T piece for the vacuum lines.
    Is this correct?

    I haven?t delved into jetting, but I had a good search of this site which reveals some hints and starting places, I shall put the carbs on as is at first (standard setting) and use filter pods.
    Is there anything else I should know before trying these out?
    Cheers

    Ed

    #2
    Just curious:

    What size GSXR carbs did you buy ? And from what bike, 750 or 1100 ?

    / Mikael

    Comment


      #3
      1989, GSXR750 38mm.

      Comment

      Working...
      X