Announcement

Collapse
No announcement yet.

Neat Gauge Add-on for the Performance Crazed...

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Neat Gauge Add-on for the Performance Crazed...

    Well I thought it was neat...
    2010 Honda VFR1200F
    1983 Suzuki GS750T (sold)
    Being Revisited
    1981 Honda CM400T
    http://www.bikepics.com/members/cloudbreakmd/

    #2
    WOW!! And cheap too!
    Hmmm...I wonder how alluring that would be to theives...
    It detaches but I don't need one more thing to take off the bike before I go in stores...

    Comment


      #3
      Why you gotta be a pessimist?
      2010 Honda VFR1200F
      1983 Suzuki GS750T (sold)
      Being Revisited
      1981 Honda CM400T
      http://www.bikepics.com/members/cloudbreakmd/

      Comment


        #4
        It's kind of odd but I used to live in Ottawa and I never saw one of those things on a bike. They are an Ottawa company and they have a very good forum where you request a product update and more often than not they follow up on it.

        Steve

        Comment


          #5
          I used to have a VF1100S Sabre with broken guages (dropped on it's side in a heated garage over winter while in storage by the handlers). The stock ones were nearly imposible to find (took me 3 months nationwide) and incredibly expensive ($300-800 depending on condition) so I considered this set-up as an alternative. Note that they do have an odometer that is not able to be reset. Very trick I think. But the quarter mile and horsepower stuff made it golden.
          2010 Honda VFR1200F
          1983 Suzuki GS750T (sold)
          Being Revisited
          1981 Honda CM400T
          http://www.bikepics.com/members/cloudbreakmd/

          Comment


            #6
            Yeah man, I may have to save up for this one.
            It would look great on the ratbike.

            Comment


              #7
              Neat little device. I did a lot of searching last summer for recorders and like the RacePak stuff.

              IMHO the hardest part to tune is the clutch. Any recorder used for drag use needs to be able to monitor clutch slippage. Two tach sensors. If your wanting to look at just the first 10 feet, the 25 Hz recording time would be too slow.

              By rules, the recorder can't display any information to the driver. You could stuff it under the seat.

              Comment

              Working...
              X