What 750 gears do I need?

[Flatline_Racing]

What 750 gears do I need to upgrade my '78 GS1000's oil system?
I have done a search but couldn't determine definitavly whether or not I need the gears from a 2v or a 4v. I will need the increased flow/pressure because i am currently putting together a turbo system using a Mitsubishi TD04 turbo and will need to supply it with adequate oil.

[Billy Ricks]

4 valve.

[Flatline_Racing]

Thanks BR.

[jgordon]

Re: What 750 gears do I need?

What 750 gears do I need to upgrade my '78 GS1000's oil system?
I have done a search but couldn't determine definitavly whether or not I need the gears from a 2v or a 4v. I will need the increased flow/pressure because i am currently putting together a turbo system using a Mitsubishi TD04 turbo and will need to supply it with adequate oil.

I put a turbo (Rajay) on my GS1100 and after a few hundred miles did a top end check and found that the turbo was taking too much of the oil even with the trick oil pump gears. I have since got an external pump
(Weldon) and am in the process of putting the motor over into a chassis. Too much umpphh for the street chassis. Just a heads up.

[lecroy]

I used gears out of a 70's 2-valve GS750 in mine. Still have that same set of gears and installed them almost 20 years ago.

[marcovandevelde]

I found both 2v and 4v gears to fit and work.

I didn't have any problems with he oilfeed off the oiltemp-connection and a gravity drain.

Marco.