Fuel injection-is there a standalone unit available?

[LW_Icarus]

just curious, if there was a standalone injection system that would lend itself to adaptation to a GS big bore engine. once the 850 is running right I want to pick up a 1000 engine and go through it, and I think injection would be a nice touch.

[gspaul]

I know the early Kwaka unit's have been used on GS's, but I have no info on hand, I'll have a look see what I can find.

[Poot]

I have seen a unit that would work with GS's on EBAY.


IT was listed at $500 bucks.

[ArttuH]

I have build a injection system for my GS1100. Now it have run fine over year and about 15000 km. I used throttle bodies, injectors and fuel pump from Kawa GPZ1100. The controller is home-made Megasquirt. The project wasn't too bad, I didn't face any serious problems but ofcourse there was lots of things to sort out.

There is some pictures and info about the project:

http://www.students.tut.fi/~heinala/mopo/en_summary.html

Check also the Finnish pages for more pictures:

http://www.students.tut.fi/~heinala/mopo/sivu2.html

http://www.students.tut.fi/~heinala/mopo/sivu3.html

http://www.students.tut.fi/~heinala/mopo/sivu4.html

[Poot]

that is quite an accomplishment! wow..... 8O

[Nerobro]

Megasquirt is a mature technology. But "off the shelf" it's not. The off the shelf systems usually require custom throttle bodies and injector mounts... And then they cost anotehr $3-10k.