Announcement

Collapse
No announcement yet.

Plugs fouling

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Plugs fouling

    So I goes out to my GS on thursday night and and the thing is runing only on two cylinders N0#2, 3,

    I go through everything, gas = good, coils = good, Plugs = 1 and 4 fouled,


    I clean the plugs and its OK again, took it for a blast and it seemed to foul again, but this time on 2 and 3,

    I changed all for plugs and its OK, its kicking out power from the Alternator/stator, but the battery was on the low side,

    the only thing that changed was I took the battery off the GS when I was messing with another bike that wouldnt start on its own battery , before I had the problem, so maybe this ws the cause, any you guys have any IDEAS?,

    Its running the standard efe ignition, and its running a Wolf pipe that seems to run the bike on the rich side, its allso running standard air box, and jets havnt been messed with at all, as far as I know since ive had the bike for 3 years the air screws on th carbs havnt been messed with either,

    ive priced a DYNA for $230 bucks, should I go to pod filters, and where or what should I do wth Jetting


    Lots of questions HUH,

    But till this plug fouling thing I really havnt had any problems with the bike with the pipe ive got on it now or jetting etc

    #2
    SO thanks for the help and advice eveyone,
    anyhow I think I Have it sorted now it looks like it was a low battery was causing all kinds of problems with the coils

    Comment


      #3
      You should have posted this in the Technical Info forum... That's were the tech gurus hang out.

      Glad you fixed the problem, though.

      Comment


        #4
        Performance Mods
        Tell us about any enhancements you have made to make your bike faster or handle better. The sky is the limit on this one.




        Technical Info
        Place your GS repair questions/answers/suggestions here. If asking a questiion, be sure to include enough information in your post so that people can help you. Also be sure to search our old Q&A pages for more information.

        Comment


          #5
          yeah I guess I posted in the wrong forum guys MI SORRY!

          Comment

          Working...
          X