6.09 at 111 mph

[RacingJake]

Tonight was a good night. Ran a 1.36 footer and a 3.90 330 footer with a ET of 6.09 at 111.61 mph, all a best ever and in the 110 club to boot

Was using the 38cv's instead of the lectrons tonight due too fixing one problem at a time. I set the intake at 110 and the exhaust at 111.5, now that the P/V's is taking care of I can re-installed the lectrons and play around with the needles some more. I should be able to break into the 5's before this year is out. I think I'll go on a diet this winter that along should put me in the 5's.

I also removed 3 out of the 6 bolts on the lockup and the bike slow down by a tenth so tomorrow the bolts go back in. I may even install my shift box and hook it up to my shift lite and go auto. Who knows maybe I'll even use my RC airplane radio and servo's so I can sit in the stands and control my bike down the track, just need a dummy tied to the bars.

[scotty]

great news As long as you are going R/C take some photos of yourself not racing------Jake

[LW_Icarus]

Re: 6.09 at 111 mph

Who knows maybe I'll even use my RC airplane radio and servo's so I can sit in the stands and control my bike down the track, just need a dummy tied to the bars.

lmao. there was a video on the web where some guys R/C'd a chevy cavalier or something similar and ran it from a chase vehicle in the desert, Ill see if I can find it.

[lecroy]

I remember that movie. It was funny.

Good job breaking the 110 MPH mark. That's about the same speed as my GS street bike in the 1/4.

[RacingJake]

Thanks Guy's

Next time out I'm going to try 48 sprocket and see what it does. Then I'm going to install the lectrons again with the needles set at 1.850 and see what happens. Got to keep up with Rosco

Knocking at the 5.99 door and I think it can get to 115 mph too :roll: