New Exaust

[danbouck]

I've got an 83 GS750 E. I bought it with an ugly 4 into 1 exaust so I switched it back to 4 into 2. But I need more power so I bought a stage 3 dynojet kit to throw in and the biggest thing a dual exaust system off of a 05 Suzi GSXR1300 Hayabusa. Now I know i will get way more than enough airflow but i'm wondering what everyone thinks of what it will look like. I don't want to get too far away from the beautiful stock look. Let me know what you think and if anyone has any suggestions for power. (btw I can't afford a bigger bike)thanks

[luc8421]

I'm assuming since you got the stage 3 jet kit, you also have pod airfilters. if you've only got the exhaust, I think you need stage one. It'll look pretty good, the big can from the busa looks out of place to some, but I don't mind. There's a couple people on the board that have used R1 and other later model cans on their bike and they look good. if you've got the whole exhaust header and everything, you'll be doing quite a bit of fabbing to get it to work, if at all. You're also going to get more performance out of a 4 into 1 exhaust system, how ugly is your old one? can it be painted? it was made specifically for your bike. the busa system was made specifically for the busa. good luck with the project and post some pics when you're done.

[Macmatic]

I put the cans and midpipes off a Hayabusa on my '83 GS750ES/EF.

You can see pics here:

http://www.thegsresources.com/_forum/viewtopic.php?t=39360&postdays=0&postorder=asc&start=0

That was just a mockup at the time but the bike is done now and with a little luck I'll be able to take pics tomorrow. I also have pics of how I modded the system to work and I'm going to write it up when I get the chance.

Looks good, sounds good.

/\/\ac

[danbouck]

I'm assuming since you got the stage 3 jet kit, you also have pod airfilters. if you've only got the exhaust, I think you need stage one. It'll look pretty good, the big can from the busa looks out of place to some, but I don't mind. There's a couple people on the board that have used R1 and other later model cans on their bike and they look good. if you've got the whole exhaust header and everything, you'll be doing quite a bit of fabbing to get it to work, if at all. You're also going to get more performance out of a 4 into 1 exhaust system, how ugly is your old one? can it be painted? it was made specifically for your bike. the busa system was made specifically for the busa. good luck with the project and post some pics when you're done.

I do have unifilters on it. As for the Headers I plan on using the stock header and my 4 into 1 wan't made for it and is the uglyest exaust I have ever seen. I will definetly throw some pics up when I'm done

[danbouck]

I put the cans and midpipes off a Hayabusa on my '83 GS750ES/EF.
/\/\ac

You just made my day that is the exact look I am looking for