Announcement

Collapse
No announcement yet.

GS1000 Drag Race Motor Pics

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    GS1000 Drag Race Motor Pics

    Enjoy



    http://216.77.188.54/coDataImages/p/Groups/178/178726/pages/443007/DRAGMOTOR005(Small).jpg
    [img]
    http://216.77.188.54/coDataImages/p/Groups/178/178726/pages/465519/DRAGMOTOR007(Small).jpg[/img]





    Notice the raised intake and exhaust ports. You can see the epoxy strategically placed in the intake ports. Exhaust port floor totally untouched, but reshaped (flat). Big intake boots accept 40mm Lectrons. 40mm/33mm titanium valves and titanium retainers. Shim under buckets to allow 500 lift cams. Bucket cavity releived to allow big cams to rotate freely. Combustion chambers fully massaged to match piston domes which are also heavily massaged. Pic of pistons shows comparison of 1260 wiseco drag piston and MTC 1175 piston I ran in my street bike back in the early 80's........Someone make me an offer on the whole motor.....Badbillyb
Working...
X